Crest Automotive Tuning - H) STYLING, BODYWORK & AERODYNAMICS: INTERIOR & EXTERIOR (* Including carbon fibre items, but please also see seperate Carbon Fibre section above ! )

Product Code: ma36widekt

Click to Enlarge

Lightweight wide arch kit for the E36 coupe.

Includes:

Front Fenders
Quarter Panels
Side Skirts
Rear Bumper
Front Bumper
Bumper Adapters

Estimated Volumetric Shipping Weight : 20.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CREST AUTOMOTIVE FOR PBMW MAG 2010

Product Code: aee36m3cbk

Click to Enlarge

Complete E36 M3 style bodykit for all E36 models (Please specify what model when ordering)

Made from FRP not cheap fibreglass

Kit consists of:

1x front bumper
1x rear bumper
2x side skirts
1x hardware/fitting kit

Estimated Volumetric Shipping Weight : 35.00 Kg

Click to Enlarge

We offer the full Flossmann genuine parts range for all BMW and Porsche models. If you dont see what you want here please do enquire.

THIS PAGE SHOWS DETAILS FOR THE E46 M3 WIDE BODY KITS, PLEASE SEE VARIATIONS SECTION ( red button at top right of this page) TO SEE MORE E46 KITS AS WELL AS OTHER BMW MODELS.

PRICE LIST LINK APPEARS AT BOTTOM OF THIS PAGE, BUT ALSO CALL OR EMAIL US FOR BEST UP TO DATE PRICING, AS CAN VARY WITH EURO EXCHANGE RATES.

The stunning Flossman widebody kits available in :

1. "Race" version GRP with epoxy resin
2. "Race" version in carbon fibre
3. "Road" version in GRP with epoxy resin

This listing is for the Carbon Fibre race version and includes several options which are detailed below for E46 M3 (See Variations Section for other versions) :

- Front bumper M3 with Fläps
- Front bumper M3 CSL with Fläps
- Front Fenders M3 + M3 CSL complete 2 pieces
- Sideskirts M3 + M3 CSL 2 pieces_CFK
- Rear Fenders M3 2 pieces_CFK
- Rear Fenders M3 CSL 2 pieces_CFK
- Rear bumper M3 with Fläps
- Rear bumper M3 CSL with Fläps
- ALMS-Style motorhood with vents
- Truck lid M3, reinforced for rear wing support
- Truck lid M3 CSL, reinforced for rear wing support
- Doors M3 + M3 CSL with frames 2 pieces
- Roof middle section
- Roofduct for passenger cabin ventilation
- Rearwings ITC 3-pieced (3planes 120cm wide )
- Rearwings GT 2-pieced (2planes 140cm wide )
- Rearwings GTR 1-pieced (1planes 180cm wide )
- Diffusor
- Enginebay cover, lower
- Tray for 120 litre fuel cell
- Mirror M3 with inboard ventilation

PLEASE NOTE : PRICES DO NOT INCLUDE SHIPPING FROM GERMANY.
Please call us to make your choice of parts and order.

CREST Flossmann Price List

Product Code: gke36gtrbp

Click to Enlarge

BMW E36 GTR

These body panels are made from the highest grade composite available and what makes these panels special is they have a fine balance between weight saving and durability.

We regularly supply all parts finish in a white gelcoat, However on request we can also offer the products in A carbon fibre finish.

Please look at the excel pricelist below for parts and prices available for this model

Estimated Volumetric Shipping Weight : 1.00 Kg

GOKE CARBON PARTS PRICE LIST EXCEL
GOKE CARBON BODY PANELS ETC PDF

Click to Enlarge

PLEASE NOTE: There are TWO versions of this product, this page lists the price for Version 1, pls see Variations Section by clicking the red Variations link button at top right of this page.

VERSION 1

HARD Motorsport E36 Coupe Rivet-on "330 style" Fender Flares are a ready-to-go option which will allow you to run the wider rubber you want for track days or autocross sessions. We used factory BMW E46 330 fenders to create the shape of our flares to maintain that distinctive factory look. The HARD Motorsport fender flares are specially designed to allow you to keep your factory BMW moldings intact to retain the classic factory look of your car. Our fender flares are made from Plastic so they won't break like fiberglass. HARD Motorsport's fender flares can be prepped and painted to match. Fitment: E36 M3 Coupe, E36 non-M Coupes with M mouldings. The flares are made to accomodate the wider motorsport side moldings. Hardmotorsports Fender Flare Kit includes: 4 unpainted, precut fender flares. (marked for drilling) 1 package of black rivets for easy installation with a clean appearance. 275/35/18 Hoosiers R6 on 18x9.5 ET35 Apex Arc-8 Wheels in the pictures.

VERSION 2, REARS - 20mm WIDER (use the red Variations link button for price)

Same great proven design just 20mm wider in the rear than our original V1 set for an additional tire width for more rubber! The Front Flares have retained the same shape no changes. HARD Motorsport E36 Coupe Rivet-on "330 style" Fender Flares V2 are a ready-to-go option which will allow you to run up to 285/30/18 rubber on 18x10 et25 wheels on both the front and rear of your E36 for track days or autocross sessions.

We have run this wheel/tire combo as listed above with proven results. We cannot confirm fitment of other wheel/tire combinations that we have not tested. Fine tuning and suspension adjustment may be necessary. It's nearly impossible to determine compatibility with the endless variety of suspension/wheel/tire combos that are possible. We'll give you the extra room, the rest is up to you!

PLEASE NOTE: THE WEIGHT LISTED BELOW REFERS TO VOLUMETRIC SHIPPING WEIGHT AND NOT ACTUAL PRODUCT WEIGHT

Estimated Volumetric Shipping Weight : 10.00 Kg

Product Code: lumstyli

E46 CLR
Click to Enlarge

E46 CLR300M
Click to Enlarge

E46 CLR COMPACT
Click to Enlarge

E46 DTM EDITION
Click to Enlarge

We are authorised agents for Lumma Tuning products.
Lumma have been around since 1987 manufacturing high quality and distinctive body kits and styling parts.
The images on this page show the E46 CLR300M + CLR COMPACT + CLR + CLR-S + DTM EDITION styling range for the E46 + E46 M3, all parts are available seperatly or as a complete kit.

Please refer to price list link below ( excel) for details and prices.

Product Code: lmae60s

E60 CLR M5 KIT
Click to Enlarge

E60 CLR KIT
Click to Enlarge

E61 CLR KIT
Click to Enlarge

We are authorised agents for Lumma Tuning products.
Lumma have been around since 1987 manufacturing high quality and distinctive body kits and styling parts.
The images on this page show the CLR 5M AND CLR 5 styling range for the E60 AND E60 M5 ,all parts are available seperatly or as a complete kit.

Please refer to price list link below ( excel) for details and prices.

LUMMA E60 + E61 CLR PRICE LIST
LUMMA E60 + E61 CLR M5 PRICE LIST

Product Code: lma6364

Click to Enlarge

We are authorised agents for Lumma Tuning products.
Lumma have been around since 1987 manufacturing high quality and distinctive body kits and styling parts.
The images on this page show the CLR E63/64 + CLR E63/64 M6 styling range for the E63/64 + E63/64 M6, all parts are available seperatly or as a complete kit.

Please refer to price list link below ( excel) for details and prices.

LUMMA E63/64 + M6 CLR PRICE LISTS
LUMMA E63/64 + M6 CLR600/CLR600S PRICE LIST

Product Code: lma87as

Click to Enlarge

We are authorised agents for Lumma Tuning products.
Lumma have been around since 1987 manufacturing high quality and distinctive body kits and styling parts.
The images on this page show the CLR E87 styling range for the E87 1 SERIES, all parts are available seperatly or as a complete kit.

Please refer to price list link below ( excel) for details and prices.

LUMMA E87 CLR PRICE LIST

Product Code: manhart4-1

MANHART MH2 GTR
Click to Enlarge

MANHART MH5 800
Click to Enlarge

MANHART MH3 600
Click to Enlarge

MANHART MH2 Performance Kit
Click to Enlarge

MANHART MH8 800
Click to Enlarge

This page is still under construction. For more information, including product details, pricing and availability, please call or email us now.
Please note, prices may change subject to exchange rates and availability.

We now offer the full range of MANHART BMW performance parts, as an official MANHART distributor.
MANHART began perfecting and optimising BMWs more than three decades ago, offering unparalleled experience and expertise in the field. MANHART’s primary focus has always been the optimisation of BMW M cars, and this shines through in the products they create.
Many of MANHART’s most famous projects are technology swaps – a V8 E30, or an S85 in an E92 M3 – but they also offer a wide range of excellent upgrades, including carbon parts for exterior and interior uses; intake and exhaust systems; an extensive range of performance kits, and their specially designed MHTRONIK engine upgrade box.
As an official distributor for MANHART, we can provide the full range of MANHART BMW performance products, to suit whatever upgrades you are interested in. Contact us now for more information on pricing and specifics.
If you get a cheaper offer elsewhere, come back to us; we will always try to beat any other genuine quote!

Estimated Volumetric Shipping Weight : 1.00 Kg