Variant Products of CREST AUTOMOTIVE / OTHER ATI HARMONIC DAMPER
These variants are compatible with your selected vehicle.
ATI HARMONIC DAMPER £1,257.00 inc. VAT
Variant Code: vmatip*4833
Description
THIS PAGE LISTS THE APPLICATION FOR THE S54 ENGINE (E46M3 + Z3M LATE + Z4M). PLEASE REFER TO MAIN FRONT PAGE FOR S50b30 and S50b32 APPLICATIONS.
Isolate harmonics before they can destroy your engine.
PLEASE NOTE, Price quoted is for Standard drive version, ATI also offer Overdrive and Underdrive options, please contact us for details.
If your engine build is plagued with broken crankshafts and oil pumps, the cause may be a mystery to you as it has been to many. Controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive.
The truth is, harmonics can destroy these motors despite their ideal balance.
ATI Performance Products, a leader in Harmonic Dampers has developed two new dampers (Part # 917994 & 917994TR) for the popular S54 & S50b32 Euro, as well as the 3 liter S50b30 Euro.
These dampers are made available exclusively through VAC, and they nearly eliminate all unstable crankshaft harmonic-vibration, allowing the engine to produce more horsepower and torque, maintain reliability, and reducing internal engine wear at the same time.
A trigger wheel comes standard on M3 Damper (Part # 917994TR) needed for M3 euro engines.
When used with our included pulley, they allow a direct replacement fit over the OEM balancer. Available in underdriven, overdriven or standard diameter. Also, configurations available for use with our dry sump kits. Both dampers have a 7" outer diameter and include OEM style timing alignment tabs.
• ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition
•Made in USA
•Eliminate problems with inline 6s fitted with lightweight clutch and flywheel assemblies
•Control destructive harmonic forces
•Reduces instances of bearing wear, accessory failure and oil pump failure
•Includes lightweight Billet Crankshaft Pulley (not shown)
Included in the Kit:
ATI/VAC S54
Harmonic Damper
VAC Crank Pulley
VAC Hardware
WARNING: ***Will NOT work with a factory damper pulley*** The VAC Underdrive Power Pulley is needed for this damper to function properly.
When used with our included VAC Crank Pulley, this is a direct bolt on solution. Available in:
VAC's ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition
Estimated Variant Shipping Weight inc Packaging: 5.00 Kg
Isolate harmonics before they can destroy your engine.
PLEASE NOTE, Price quoted is for Standard drive version, ATI also offer Overdrive and Underdrive options, please contact us for details.
If your engine build is plagued with broken crankshafts and oil pumps, the cause may be a mystery to you as it has been to many. Controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive.
The truth is, harmonics can destroy these motors despite their ideal balance.
ATI Performance Products, a leader in Harmonic Dampers has developed two new dampers (Part # 917994 & 917994TR) for the popular S54 & S50b32 Euro, as well as the 3 liter S50b30 Euro.
These dampers are made available exclusively through VAC, and they nearly eliminate all unstable crankshaft harmonic-vibration, allowing the engine to produce more horsepower and torque, maintain reliability, and reducing internal engine wear at the same time.
A trigger wheel comes standard on M3 Damper (Part # 917994TR) needed for M3 euro engines.
When used with our included pulley, they allow a direct replacement fit over the OEM balancer. Available in underdriven, overdriven or standard diameter. Also, configurations available for use with our dry sump kits. Both dampers have a 7" outer diameter and include OEM style timing alignment tabs.
• ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition
•Made in USA
•Eliminate problems with inline 6s fitted with lightweight clutch and flywheel assemblies
•Control destructive harmonic forces
•Reduces instances of bearing wear, accessory failure and oil pump failure
•Includes lightweight Billet Crankshaft Pulley (not shown)
Included in the Kit:
ATI/VAC S54
Harmonic Damper
VAC Crank Pulley
VAC Hardware
WARNING: ***Will NOT work with a factory damper pulley*** The VAC Underdrive Power Pulley is needed for this damper to function properly.
When used with our included VAC Crank Pulley, this is a direct bolt on solution. Available in:
VAC's ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition
Estimated Variant Shipping Weight inc Packaging: 5.00 Kg